• 燃料油和溶剂油类
  • 润滑油、润滑脂类
  • 液化气类
  • 苯类、石蜡类
  • 沥青、冷却液类
  • 其它
  • 产品展示当前位置:首页 > 产品展示 > 润滑油、润滑脂类

    产品型号:JSH3503

    产品名称:自动深色雷竞技官网手机版产品硫含量雷竞技(管式炉法)JSH3503

    产品说明:

    JSH3503自动深色雷竞技官网手机版产品硫含量雷竞技(管式炉法)

    一、符合GB/T387标准

    二、主要技术参数

    控制方式:单片机自动程序控制

    控温方式:单片机+数显温控仪自动控温

    控速方式:单片机自动控制

    计时方式:单片机程序自动计时

    控制温度:900950

    加热功率:1.5kw×2

    工作电源:AC220V±10% 50HZ

    三、性能及特点:

    1、采用单片机自动程序控制和自动计时,动作过程灵活可靠。温度及时间均可通过单片机控制面板进行修改和设定。

    2、炉温采用进口数显温控仪自动控温,热电偶测温,控温精度高。

    3、仪器管式炉移动速度,即燃烧、焙烧时间均由单片机自动程序控制和自动计时;燃烧时间可在3040分钟和5060分钟两组参数进行选择。

    4、采用双管分别控温,加热互不影响,炉丝不易损坏;

    5、采用功率大、体积小、噪音低的空气压缩机,流量稳定。

    JSH3503 Automatic Determination of sulfur content in Dark Petroleum Products (tubular furnace method)

    I. Comply with GB/T387 standard

    Ii. Main technical parameters

    Control mode: SCM automatic program control

    Temperature control mode: SCM + digital temperature controller automatic temperature control

    Speed control mode: SCM automatic control

    Timing: SCM program automatic timing

    Control temperature: 900 ~ 950

    Heating power: 1.5KW ×2 PCS

    Power supply: AC220V±10% 50HZ

    Iii. Performance and Characteristics:

    1, the use of single-chip automatic program control and automatic timing, the action process is flexible and reliable. Temperature and time can be modified and set by SCM control panel.

    2, furnace temperature adopts imported digital display temperature controller automatic temperature control, thermocouple temperature measurement, temperature control precision is high.

    3. The moving speed of the tube furnace, that is, the burning and roasting time, is automatically controlled by the single chip microcomputer with automatic program and timing. The burning time can be selected between 30-40 minutes and 50-60 minutes.

    4. Adopt two pipes to control the temperature respectively. Heating does not affect each other, and the furnace wire is not easy to be damaged.

    5, the use of large power, small volume, low noise air compressor, flow stability.